Balanset-1A

Brucescork

Balanset-1A: Advanced Portable Balancer & Vibration Analyzer
High-precision Dynamic Balancing Solution
Balanset-1A stands as an advanced solution for vibration correction of rotors in their own bearings, created by Estonian company Vibromera OU. The device delivers professional equipment balancing at €1,751, which is substantially less expensive than traditional vibration analyzers while retaining superior measurement accuracy. The system allows on-site balancing directly at the equipment's installation site without requiring removal, which is critically important for reducing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company focusing in the development and manufacturing of equipment for technical diagnostics of industrial equipment. The company is incorporated in Estonia (registration number 14317077) and has representatives in Portugal.
Contact Information:

Official website: https://vibromera.eu/shop/2/

Technical Specifications
Measurement Parameters
Balanset-1A provides precise measurements using a two-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The working frequency range is 5-550 Hz with possible extension to 1000 Hz. The system supports rotation frequency measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Operating Principle
The device employs phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two mono-directional accelerometers measure mechanical oscillations proportional to acceleration, while a laser tachometer generates impulse signals for determining rotational speed and phase angle. Digital signal processing includes FFT analysis for frequency analysis and custom algorithms for automatic computation of balancing masses.
Full Kit Contents
The standard Balanset-1A delivery includes:

Measurement unit with USB interface - primary module with built-in preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (optionally 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for accurate measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation

Performance Capabilities
Vibrometer Mode
Balanset-1A operates as a comprehensive vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, measuring amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system offers display of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and two-plane (dynamic) balancing with automatic calculation of correction masses and their installation angles. The unique influence coefficient saving function permits considerable acceleration of repeat balancing of same-type equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The user-friendly program interface delivers step-by-step guidance through the balancing process, making the device usable to personnel without specific training. Key functions include:

Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)

Application Areas and Equipment Types
Industrial Equipment
Balanset-1A is efficiently used for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In production facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device provides special value for agriculture, where uninterrupted operation during season is essential. Balanset-1A is employed for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The ability to balance on-site without equipment disassembly enables eliminating costly downtime during peak harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The rotation frequency range from 250 to 90,000 RPM covers practically all types of industrial equipment.
Superiority Over Competitors
Economic Value
At a price of €1,751, Balanset-1A provides the functionality of devices costing €10,000-25,000. The investment pays for itself after preventing just 2-3 bearing failures. Cost reduction on outsourced balancing specialist services amounts to thousands of euros annually.
Ease of Use
Unlike complicated vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software permits professional balancing by personnel without specific vibration diagnostics training.
Portability and Autonomy
The complete kit weighs only 4 kg, with power supplied through the laptop's USB port. This allows balancing in remote conditions, at isolated sites, and in difficult-access locations without additional power supply.
Versatile Application
One device is suitable for balancing the most extensive spectrum of equipment - from small electric motors to large industrial fans and turbines. Support for one and two-plane balancing covers all standard tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s - a 50-fold improvement. This demonstrates the remarkable accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers successfully balanced radial fans, achieving reduced energy consumption, removed excessive noise, and increased equipment lifespan. Energy savings recovered the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an vital tool preventing costly breakdowns during peak season. Lower vibration of threshing drums led to lower fuel consumption and bearing wear.
Cost and Delivery Terms
Current Prices

Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Bulk Discounts: up to 15% for orders of 4+ units

Purchase Options

Official Website: vibromera.eu (recommended)
eBay: trusted sellers with 100% rating
Industrial Distributors: through B2B channels

Payment and Shipping Terms

Payment Methods: PayPal, bank cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: manufacturer's warranty
Technical Support: included in price

Final Assessment
Balanset-1A constitutes an ideal solution for organizations aiming to implement an efficient equipment balancing system without significant capital expenditure. The device democratizes access to professional balancing, permitting small enterprises and service centers to offer services at the level of large industrial companies.
The combination of accessible price, ease of use, and professional capabilities makes Balanset-1A an vital tool for modern technical maintenance. Investment in this device is an investment in equipment dependability, decreased operating costs, and increased competitiveness of your business.